Project constraints :

 

The Mechanical Engineering Department is looking for a space saving CNC table that can be retrofitted as a routing table, a 3D printer, or even a laser cutter. This year’s project will be centered on a routing table design configuration. As such, the client is looking for the following out of the finished product:

- Ability to use both a typical router or dremel tool as the spindle

- A robust table that has the ability to clamp typical work pieces

- A robust travel system that limits deflection of tooling during operation

- Ability for the table, travel system, and controls to convert into future configurations (3D printer or laser cutter) by future capstone teams

- Travel – approximately 12x12x3 inches

- Ability to make both aluminum and wooden parts

- Uses standard 120V 60Hz

- Uses commercially available control boards and motors

- Interfaces with available open source software on a windows operating system

- Safety shielding around the table and the ability for the operator to still see the work piece

- Must have a safety kill switch and appropriate fusing per industry standards

 

The finished deliverable to the client will include the following:

- The functional system after a demonstration of the system making aluminum and wooden parts

- Provide cut depth and width recommendations based on final design

- Provide a feeds and speeds chart based on different materials

- Provide a user’s manual for operation

 

 

 

Also check the house of quality for more information: